| Name | Maloney No-Hole Iol Manipulator |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;K32692;K-32692;E0579;601333;60-1333;OP0921-701;OP0921701;6013-33; |
| Specialty | Ophthalmology-Hooks & Manipulators |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Medicrest Surgical Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Maloney No-Hole Iol Manipulator
tear drop shape tip w/ post, 4-3/4″ (12.0 cm) Maloney No-Hole IOL Manipulator is a useful tool for cataract procedures. The tear-drop shaped tip is ideal for manipulating the lens implant without risk of damaging or scratching. The extended working length allows the surgeon to maneuver the implant into the space desired.
Description
Related products
Clayman-Jaffe Lens Manipulating Hook
9.0 mm shaft w/ 0.2 mm hook, angled 45 degrees, 4-3/4" (12.0 cm)s Clayman-Jaffe Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The 45 degree angled hook is ideal for moving the lens into a desired position for removal.
Hirschman Iris Hook
0.75 mm hook, angled, 4-3/4" (12.0 cm) Hirschman Iris Hook is a commonly used tool during cataract procedures and operations needing access to the lens capsule. The 0.75mm hook provides fine control while retracting only a selected portion of iris tissue. A blunted tip assures minimal tissue damage to the surrounding globe.
Koch Stop & Chop Manipulator
angled shaft w/ 1.5 mm tip, 4-1/3" (11.2 cm) Koch Stop & Chop Manipulator is a tool used exclusively for cataract procedures. The manipulator is used to facilitate the stop and chop technique, in which the lens nucleus is initially sculpted and then chopped into smaller pieces for extraction. The angled shaft aids in accessing the lens capsule.
Kuglen Iris Hook & Lens Manipulator – Push-Pull Pattern
push-pull pattern, 4-1/2" (11.5 cm) Kuglen Iris Hook & Lens Manipulator is a multipurpose tool used in a variety of cataract procedures. The rounded button end is delicate enough to retract iris tissue to expose the anterior capsule of the lens. In addition, the instrument can be used to maneuver the lens into an ideal position for retraction. Both straight and angled models are available depending on physician preference.
Gass Retinal Detachment Hook
5-3/4" (14.5 cm) Gass Retinal Detachment Hook is a multipurpose tool used for procedures involving the retina and extraoccular muscles. The rounded hook may be used to examine the delicate retinal tissue for manipulation following detachment. IN addition, the wide tip is handy for the lifting of extraocular muscles for the passing of sutures.
Jaffe Lens Manipulating Hook
0.15 mm diameter, straight, 4-1/2" (11.5 cm) Jaffe Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The thin shaft of the hook is meant to maximize control of the instrument while providing enough leverage to maneuver the lens into a desired position.
Lewicky Lens Manipulating Hook
9.0 mm shaft, 90 degrees angled 2.0 mm tip, curved, 4-1/2" (11.5 cm) Lewicky Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The extended length of the hook combined with the angled tip minimizes surgical obstruction during the procedure.
Osher Nucleus Manipulator
smaller than 60-1313, 0.5 mm two-prong tip, blunt, 4-1/2" (11.5 cm) Osher Nucleus Manipulator is a useful tool for cataract procedures. The tool can be used to shift the center of the lens to a proper surgical position if it slips underneath the surrounding iris tissue. The two prong blunt tip is ideal for easy manipulation without risk of damaging surrounding tissue.
Reviews
There are no reviews yet.