Name | Leyla Brain Retractors Accessories |
Lead Time | Lead time advised within 48 hours of order placement. |
Competitor | ;FF285R;NL1279002;NL1279-002;R2381;575941;57-5941;5759-41;FF282R;NL1279003;NL1279-003;R2382;R2384;575942;57-5942;5759-42;FF280R;FF286R;NL1279001;NL1279-001;575943;57-5943;5759-43;5759-41_5759-43; |
Specialty | Neuro, Ortho & Spine-Retractors – Leyla Retractor System |
Material Finish | Stainless Steel |
Grade | Premium Operating Room |
Units of Measurement | Each |
Sterility | Non-Sterile |
Usage | Reusable |
Leyla Brain Retractors Accessories
for mounting retractor to the operating table Leyla Brain Retractors Accessories are additionally components that are used alongside other instruments to aid in neurosurgical procedures. This instrument is made for mounting the retractor to the operating table. The added stability of being affixed to the table gives the surgeon more confidence in the hold of the retractor especially when dealing with the delicate tissue of the brain that be easily damaged. This is available as three different components: the rigid holding arm, coupling head to hold up to flexible arms or the ball joint clamp for mounting the rigid holding arm to the side rail of the operating table.
SKU: MSI-01-1065
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Leyla Brain Retractors Accessories” Cancel reply
Related products
Caspar Type Counter-Retractor
Caspar Type Counter-Retractor is a specialized instrument made for retraction of soft tissue during neurosurgical procedures. This retractor is available as a frame with six different blades ranging from 35.0 mm to 60.0 mm in 5.0 mm increments. The variety of sizes of blades allows this retractor to be suitable for many different patients and surgeon preferences.
Cervical Retractor Fenestrated Blade
stainless steel, ball snap closure, bluntCervical Retractor Fenestrated Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. Both blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction and the fenestrations increase the surface area over which the pressure is distributed. They are available in variety of sizes and curvatures making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Charnley Initial Incision Retractor
standard pattern Charnley Initial Incision Retractor is a unique instrument specifically designed for use in retraction at the beginning of surgical intervention when the first incision is made. An ideal tool for a vase array of neurosurgical procedures because it securely open up the surgical field to give unobstructed access. This retractor set includes a frame, a long blade, short blade as well as a weight on a chain.
Caspar-Type Titanium Spinal Spreading System
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Adson Cerebellar Retractor
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Beckmann-Eaton Laminectomy Retractor
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm) Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Blount Retractor
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Cloward Style Blade Retractor
7-1/2" (19.0 cm)Cloward Style Blade Retractor is a highly versatile instrument crafted for use in a variety of neurosurgical procedures. It is best suited for use in retraction such as that which is necessary in spinal surgery. The ribbed handle giving additional gripping ability and the angled blade design makes it easy to manipulate in the surgical field while keeping the handle out of the plane of surgery. Additionally this retractor is available in four different sizes 13.0 mm (no lip), 18.0 mm, 20.0 mm and 25.0 mm.
Reviews
There are no reviews yet.