| Name | Hercules-Type Cable Cutter |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers – Hercules-Type Wire Cutters |
| Material Finish | Stainless Steel/Tungsten Carbide |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Medicrest Surgical Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Hercules-Type Cable Cutter
replaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7″ (18.0 cm) Hercules-Type Cable Cutter can be used to trim and adjust the length of cables. This instrument features replaceable tungsten carbide blades that can be used on for cables from 1.0 mm to 2.0 mm. Tungsten carbide jaws gives this instrument added strength as it is the hardest metal made for surgical instruments and results in a supremely durable jaw that can be used for sustained cutting. Additionally this instrument is 7″ long and has gold tipped handles.
Description
Related products
Flat Nose Pliers
serrated jaws, 5-1/2" (14.0 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Front & Side Wire Cutter – Tungsten Carbide
tungsten carbide jaws, double-action, 1/16" (1.7 mm) maximum capacity, 7-1/8" (18.1 cm) Front and Side Wire Cutter is designed for use in surgical procedures that require manipulation of the length of surgical wire. In procedures such as laminectomies or total hip replacements insertion of a wire is necessary to confer some stability to the newly operated upon region. Not only does this give stability but speeds up the healing time and prevents trauma to the area during the healing process. This particular cutter is a front and side cutter and features double action tungsten carbide jaws that has a maximum capacity of 1.7 mm.
Cable Cutter – Tungsten Carbide
tungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm) Cable Cutter is an instrument ideally suited for use in orthopedic procedures. A number of surgical interventions require the placement of steel wires or cable to confer additionally stability to an area of bone. Specifically cable can be used in total hip arthroplasty to give more secure fixation and prevent trauma during the healing process. After inserting the cable it needs to be trimmed and manipulated to be the perfect length for that unique patients scenario. Additionally this instrument features tungsten carbide jaws and has a maximum capacity of 2.0 mm.
Flat Nose Pliers – Slender Jaws
slender jaws, 2.0 mm tip, 6" (15.2 cm) Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Flat Nose K-Wire Pliers
serrated jaws, 7" (17.8 cm), 3.0 mm tip Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
K-Wire Side Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
End Cutter – Double Spring, Large, Tungsten Carbide
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Reviews
There are no reviews yet.