| Name | Hibbs Chisel |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Medicrest Surgical Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Hibbs Chisel
9-1/2″ (24.0 cm) Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Description
Related products
U.S. Army Pattern Gouges
6-1/4" (16.0 cm) US Army Pattern Gouge is a specialized instrument designed for removal of specific segments of bone. This gouge is designed similarly to a chisel but the blade portion features a curvature to it allowing it to be used to scoop up segments. The opposite end of this gouge has a rounded, flat end that can be used with a mallet to increase the driving force to effectively pierce through bone. This gouge is available in three sizes 6.0 mm, 12.0 mm and 18.0 mm making them well suited for larger bones in the spinal surgery and smaller ones for more delicate work on the skull.
Hibbs Gouge
9-1/2" (24.0 cm) Hibbs Gouge is uniquely suited for use in surgical procedures that require splitting or scraping bone. This gouge features a strong and sturdy handle for a secure and strong grip to reduce slippage when extra force is applied via a mallet. Additionally the chisel end features a curve making it well suited to the contour of bone and reducing splintering making it a more effective cutting tool. This instrument is available in both a straight or curved profile and in a ten different widths making it highly customizable and suitable for almost any neurosurgical procedures.
U.S. Army Pattern Osteotome
6-1/4" (16.0 cm) US Army Pattern Osteotome is a versatile instrument for use in manipulating of bone. This osteotome features a straight profile and can be used to cut bone or to carve out small pieces to allow access to more difficult to reach areas. Additionally this osteotome is crafted with a chisel type blade that can be used to scrape, clean or sculpt bone for a variety of surgical procedures. This instrument is available in three sizes 6.0, 12.0 and 18.0 mm.
Stille Osteotome
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Smith-Petersen Gouge
8" (20.0 cm) Smith Peterson Gouge is crafted for use in surgical procedures that require manipulation of bone such as scooping or creating a hole. This instrument can be used to increase access to the central soft tissue portion of the bone or in prepping bones from grafting. Uniquely this gouge features a rounded handle that increases gripping and allowing for firm handling and maneuverability. Additionally this instrument is available in either a straight or curved pattern and in seven sizes ranging in width from 6.0 mm to 30.00.
Cobb Spinal Gouge
hexagonal handle, 9-1/2" (24.1 cm) Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Lambotte Osteotome – W/Out Calibration Lines
w/ out calibration lines, 9" (23.0 cm)Lambotte Osteotome is specifically designed for uses such a bone cutting. This instrument is a flat metal piece that tapers on one end and is slightly curved out of the plane of the handle. Osteotomes have the added benefit of being operated manually and thus the pressure can be adjusted readily as cuts are created and continued through bone. Additionally this osteotome does not have calibration lines. It is available in a vast array of sizes ranging form 4.0 mm to 50 mm and in either a straight or curved profile making them well suited for a wide array of surgical scenarios and surgeon preferences.
McCulloch Hockey Stick Chisel
8-1/2" (22.0 cm) McCulloch Hockey Stick Chisel is a specialized instrument made for use in orthopedic spinal procedures. It is specifically used in procedures of the spine such as vertebral osteotomy and is particularly well suited with its slim handle and elongated, flattened profile. The angle at the end prevents the tip of the chisel from pierces and causing injury to the spinal cord during surgery. This instrument is available in either a right or left curve making it a versatile tool that fits any patient scenario and satisfies any surgeon preference.
Reviews
There are no reviews yet.