| Name | Cobb Spinal Gouge |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Chisels & Gouges |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Medicrest Surgical Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Cobb Spinal Gouge
hexagonal handle, 9-1/2″ (24.1 cm) Cobb Spinal Gouge is a specially crafted instrument for use in spinal surgeries. This instrument features a solidly designed hexagonal handle which gives adequate area for gripping. The gouge is designed to be used in the close spaces of the vertebral canal and other areas encountered in spinal surgery to make holes or to scrape away at bone. It is available in four different styles: straight, medium curve, strong curve and reverse curve making it well suited for a vast array of surgical scenarios and satisfy any surgeon preference.
Description
Related products
Dawson-Yuhl Gouge
7.0 mm, 11" (28.0 cm) Dawson- Yuhl Gouge is specially crafted for delicate work in bone manipulation. It features a 7 mm gouge that can be used to scrape along bone or with a mallet be used to create holes or splinter bone to gain access to the inside. Uniquely this instrument is available in two different styles, straight or bayonet, allowing the perfect fit for any particular surgical maneuver.
Stille Osteotome
straight, 8" (20.0 cm)Stille Osteotome is crafted for use in neurosurgical procedures that require cutting or chiseling through bones. This osteotome features a chisel tip that can be used to scrape or sculpt bone. Additionally on the opposite end of the chisel affixed to the handle is a wide blunt end that can be hammered on to drive the chisel into bone. This instrument is available in eleven different widths ranging from 4.0 mm to 25.0 mm making it well suited for use in wide ranging procedures that require small modifications to skull bone or cuts through entire vertebrae.
Hibbs Chisel
9-1/2" (24.0 cm) Hibbs Chisel is designed to scrape away and through bone to allow access to the surgical field. This chisel is designed to cleanly and effectively make cuts in bone without causing splintering and damage to surrounding areas. This instrument features a strong geometric shaped handle that tapers into a narrow neck and widens again to create a chisel head. The chisel also features a sharpened end for increased effectiveness in bone manipulation. This instrument is available in ten different sizes ranging from 6.0 mm to 38.0 mm making it well suited for use in small delicate areas as well as in larger bony areas.
Alexander Gouge
7" (18.0 cm) Alexander Gouge is specially designed for use in procedures that require manipulating of bone via scooping or removal of particular portions. This gouge features a long slim handle portion that transitions to the gouge blade. This instrument is designed for chisels but more specifically instead of a flat edge it features a rounded edge that allows it to be used to create holes or to scoop out segments of bone.
Smith-Petersen Osteotome
8" (20.0 cm) Smith Peterson Osteotome is an ideal instrument for use in neurosurgical and other procedures that require manipulation of bone. This osteotome features a smooth barrel shaped handle that is easy to grip. Additionally it features a wide, flat handle end that can be struck with a hammer or mallet to drive the chisel shaped end with increased force. This instrument can be used to cut, scrape or shave bone to increase access to the surgical field or simply for reshaping. This osteotome is available seven sizes ranging from 6.0 mm to 32.0 mm and in either a straight or curved profile making it useful in a wide range of surgical procedures including craniotomies.
Cobb Osteotome
11" (28.0 cm)Cobb Osteotome is ideally suited for use in neurosurgical procedures such as craniotomies. This osteotome can be used to do things such as create a window in the skull to allow access inside or to scrape or carve away at bone to reshape it. Additionally this instrument features a large, cylindrical handle with micro-serrations for added griping as well as a neck piece from which the blade extends making it firmly built. This instrument is available in seven sizes ranging from 6.0 mm to 32.0 mm and in either a curved or straight profile making it well suited for a number of diverse patient needs and surgeon preferences.
Swan Neck Gouge
9" (23.0 cm) Swan Neck Gouge is an instrument designed for gouging or removing particular sections of bone. Additionally it can also be used as a chisel with increased force applied to it to split bone or to scoop out segments to increase access to the center. A unique feature of this particular gouge is the swan shaped curvature that allows it to access difficult to reach areas without obscuring the surgical field and keeping the handle out the plane of surgery.
Mini-Lambotte Osteotome
swiss pattern, 5-1/8" (13.0 cm) Mini-Lambotte Osteotome is an instrument designed for use in cutting bone. This osteotome is crafted with a Swiss pattern. Osteotome offer significant advantages over drilling because they do not generate heat which can be damaging and also offer an increased level of tactile sensation. This instrument is available in a straight profile at twelve different lengths from 2.0 mm to 24.0 mm in 2 mm increments or in a set of nine. This instrument is also available in a curved profile in seven different lengths from 2.0 to 14.0 mm in 2 mm increments.
Reviews
There are no reviews yet.