| Name | Shepard Iris Hook |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;174;1-74;OP2511;350347;350-347;K35110;K3-5110;601322;60-1322;6013-22; |
| Specialty | Ophthalmology-Hooks & Manipulators |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Medicrest Surgical Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Shepard Iris Hook
1.0 mm, blunt, 4-7/8″ (12.4 cm) Shepard Iris Hook is a commonly used tool in cataract surgeries. The hook is used to retract a portion of the iris tissue to gain access to the lens capsule. Often, multiple hooks are used at different positions around the iris and anchored, providing adequate visualization for lens removal. The hook features a blunt tip to minimize extraneous tissue damage.
Description
Related products
Kuglen Iris Hook & Lens Manipulator
straight shaft, 0.5 mm hook, blunt, 4-3/4" (12.0 cm) Kuglen Iris Hook & Lens Manipulator is a unique tool in cataract procedures. The tool may be used to pull the delicate iris tissue to expose the deeper lens capsule. In addition, the instrument is also meant to maneuver the native lens into a desirable position of phacoemulsification.
Nagahara Nucleus Chopper
1.25 mm tip & blade offset at 60 degree angle, round knurled handle, 4-1/2" (11.4 cm) Nagahara Nucleus Chopper is a commonly used tool in cataract extraction procedures. The chopper is used to divide the opacified nucleus into smaller pieces for eventual extraction. The instrument features a 1.25 mm tip with a 60 degree offset blade, aiding in visualization during incisions of lens tissue.
Koch Stop & Chop Manipulator
angled shaft w/ 1.5 mm tip, 4-1/3" (11.2 cm) Koch Stop & Chop Manipulator is a tool used exclusively for cataract procedures. The manipulator is used to facilitate the stop and chop technique, in which the lens nucleus is initially sculpted and then chopped into smaller pieces for extraction. The angled shaft aids in accessing the lens capsule.
Jaffe Lens Manipulating Hook
0.15 mm diameter, straight, 4-1/2" (11.5 cm) Jaffe Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The thin shaft of the hook is meant to maximize control of the instrument while providing enough leverage to maneuver the lens into a desired position.
Osher Nucleus Manipulator
smaller than 60-1313, 0.5 mm two-prong tip, blunt, 4-1/2" (11.5 cm) Osher Nucleus Manipulator is a useful tool for cataract procedures. The tool can be used to shift the center of the lens to a proper surgical position if it slips underneath the surrounding iris tissue. The two prong blunt tip is ideal for easy manipulation without risk of damaging surrounding tissue.
Sheets Iris Hook
0.3 mm hook w/ guard, 5-1/8" (13.0 cm) Sheets Iris Hook is a commonly used tool during cataract procedures and operations needing access to the lens capsule. The 0.3mm hook provides extra fine control in retracting only the desired portion of iris. In addition, the hook comes available with a guard to protect from damaging surrounding tissue.
Clayman-Jaffe Lens Manipulating Hook
9.0 mm shaft w/ 0.2 mm hook, angled 45 degrees, 4-3/4" (12.0 cm)s Clayman-Jaffe Lens Manipulating Hook is a commonly used tool during cataract procedures. The hook is used to manipulate the opacified native lens during a phacoemulsification procedure. The 45 degree angled hook is ideal for moving the lens into a desired position for removal.
Reviews
There are no reviews yet.