| Name | Bone Clamp (Reposition Forceps) |
| Lead Time | 0-3 days |
| Specialty | Neuro, Ortho & Spine-Bone Holding Forceps |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Medicrest Surgical Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Bone Clamp (Reposition Forceps)
Bone Clamp (Reposition Forceps)
extra long ratchet, curved, 5-1/8″ (13.0 cm)
Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.
Description
Related products
Depth Gauge
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Bone Graft Holder (Caspar Type)
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Distraction Screws
Distraction Screws
package of 5Distraction Screws are an accessory that is usually used alongside distractors or a distraction screwdriver that is spec. These screws are ideally suited for use in spinal surgeries specifically in minimally invasive procedures. These instruments are designed to distract disc space to allow a clearer view of the surgical field to ensure adequate space for the surgeon to perform the spinal surgery. These screws are available in three sizes 14.0 mm, 16.0 mm and 18.0 mm in a package of 5.
Vertebral Body Dissector (Caspar Type)
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Cervical Vertebral Body Multi Level Distractor elongated toothed bar
Cervical Vertebral Body Multi Level Distractor
elongated toothed bar Caspar Cervical Vertebral Distractor Drill Guide is crafted for use alongside the Casper Cervical Vertebral Distractor. Some spinal procedures also require the use of a drill and this guide can be used in conjunction with them to ensure the drill follows the trajectory intended by the surgeon. Additionally the use of a guide helps to protect surrounding tissue areas from the trauma that can be inflicted by a high powered tool like a drill. This instrument is available in either a left or right design making it suitable for a variety of specific purposes.
Twist Drill
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Rowland-Ruskin Forceps
Rowland-Ruskin Forceps
double-action, narrow jaws, 7-1/8" (18.0 cm)Â Rowland-Ruskin Forceps are a unique designed instrument ideally suited for use in a number of different procedures that require clipping of small bones. These forceps features a spring handle as well as double-action, narrow jaws. These are well suited for areas such as the orbit of the eye as well as bones in the nasal area. These forceps are available in two different profiles straight or curved making it well suited for access in a number of surgical scenarios.
Reiner Rongeur
Reiner Rongeur
7" (17.8 cm)
Reiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.
Reviews
There are no reviews yet.