| Name | Depth Gauge |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Medicrest Surgical Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Depth Gauge
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Description
Related products
Twist Drill
Twist Drill
drilling depth 8.0 mm, length 5-3/4" (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Bone Graft Impactor (Caspar Type)
Bone Graft Impactor (Caspar Type)
graduated 1/4" to 1-1/4", shaft 6-1/4" (16.0 cm)Bone Graft Impactor is of the Casper type and is a multi-purpose instrument that can be used in a variety of orthopedic procedures. Specifically it is designed for use in bone grafting procedures to ensure that the graft is properly settled into place. It features a handle from which the tapering body extends ending in a small circular head perfect for setting on the graft and applying force. This instrument is graduated ¼" to 1 ¼" and features a shaft of 6 ¼". This instrument is available in three sizes 3.0 mm, 5.0 mm and 8.0 mm.
Bone Clamp (Reposition Forceps)
Bone Clamp (Reposition Forceps)
extra long ratchet, curved, 5-1/8" (13.0 cm)
Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.
Bone Hook
Bone Hook
sharp, 7" (18.0 cm)Bone Hook is a highly versatile instrument that is ideally used in procedures that require manipulation and handling of bone. It features a sharp bone hook that allows it to effectively grip bones and move them into the desired position. Additionally the shape of this instrument lends it to use in retraction of bone and other hard tissue surfaces to increase access to the surgical field. This hook is available with a phenolic handle or stainless steel t-handle making it able to satisfy and surgeon preference.
Bone Graft Harvesting Forceps (Graft Cutter)
Bone Graft Harvesting Forceps (Graft Cutter)
adjustable depth control, 8-3/4" (22.0 cm)Bone Graft Harvesting Forceps are designed for use in orthopedic bone grafting procedures. These forceps are designed to harvest portions of bone for use in grafts in other parts of the body or even for use in a different patient. This instrument is also referred to as a graft cutter and comes equipped with an adjustable depth control. These forceps are available either 10.0 mm wide making it appropriate for 9.0 – 12.0 mm grafts or 7.0 mm wide making it appropriate for 6.0 – 9.0 mm grafts.
Bone Reduction Forceps
Bone Reduction Forceps - Jaws Slightly Curved
jaws slightly curved, 5-1/2" (14.0 cm)
Bone Reduction Forceps is a highly versatile instrument made for use in orthopedic surgeries that require alignment and manipulation of bone. This forceps comes equipped with ring handles for ease in manual operation as well as a ratcheting mechanism that allows the surgeon to set it at any particular width. Additionally there is a slight curvature to the jaws and measuring at 5.5" long this instrument can easily fit into small spaces and smaller sized bones.
Distraction Screws
Distraction Screws
package of 5Distraction Screws are an accessory that is usually used alongside distractors or a distraction screwdriver that is spec. These screws are ideally suited for use in spinal surgeries specifically in minimally invasive procedures. These instruments are designed to distract disc space to allow a clearer view of the surgical field to ensure adequate space for the surgeon to perform the spinal surgery. These screws are available in three sizes 14.0 mm, 16.0 mm and 18.0 mm in a package of 5.
Reiner Rongeur
Reiner Rongeur
7" (17.8 cm)
Reiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.
Reviews
There are no reviews yet.